Victron Quattro

3kVA – 5kVA – 8kVA – 10kVA

 Two AC inputs with integrated transfer switch

The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source.

Two AC Outputs
The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

Unique PowerAssist feature
The Quattro will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Virtually unlimited power thanks to parallel operation
Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.

SimpliPhi OES3 Lithium Ferrous Phosphate (LFP) battery 3.4kWh 48V

3.4 kWh optimized energy storage Lithium Ferrous Phosphate (LFP) battery. LFP is the safest, most environmentally benign lithium chemistry.
No heat build up – No risk of thermal runaway.
Drop in replacement for existing battery systems.
Includes built in Battery Management System (BMS).
– 51.2 VDC (nom)
– 66 Ah
– 3.44 kWh
– 10 year warranty (365 cycles p.a.)
– 100% depth of discharge
Designed and manufactured in California, USA.

Fronius Galvo

Fronius Galvo

The future-proof inverter for small self-consumption systems.

With power categories ranging from 1.5 to 3.1 kW, the Fronius Galvo is perfect for households – and is especially suitable for self-consumption systems. The integrated energy management relay allows the self-consumption component to be maximised. A host of other smart features make the Fronius Galvo one of the most future-proof inverters in its class: for example, the integrated datalogging, the simple connection to the internet by WLAN, or the plug-in card technology for retrofitting additional functions.

/  Suitable for all module technologies due to galvanic
/  New hinged system for quick and easy installation
/  Low weight and compact size
/  For indoor and outdoor mounting (high protection class IP 65)